TAL Profix is an acrylic water based adhesive use for adhering any type of coarse uneven backed carpeting. It provides exceptional dimensional stability and shear strength.
Used for vinyl and carpet tiles 

Shake/agitate container well before use. Do not dilute or adulterate in any way.

TAL Profix should be applied using a serrated trowel to ensure optimum transfer of adhesive, as follows:

Vinyl tiles and sheeting and backed carpeting – serrated trowel with triangular notches of 1.5mm x 1.5mm with 4mm centres

Coarse, unbacked carpeting (eg needlepunch carpeting) – serrated trowel with triangular notches of 3.0mm x 3.0mm with 4mm centres.

Apply the adhesive onto the clean, prepared substrate and allow the adhesive to flash off and become slightly tacky before applying the floor covering.

Coverage:

Applied by 1.5mm Serrated Trowel : ± 6.0m² / 1ℓ

Applied by 3mm Serrated Trowel : ± 3.0m² / 1ℓ

Actual coverages will be determined by site conditions, workmanship, etc.

Pack size: 20L plastic buckets