Search
Grout Selection Guide
Tile Type
Recommended TAL Grout
Interior ‘dry’ areas
Interior 'wet' areas, Exterior / Exposed areas, Suspended Floors, Heavy Traffic Areas
Hygiene Areas (food prep and processing areas, clinics and hospitals), Pools, Saunas, Steamrooms, etc.
Ceramic Wall Tiles
Minimum Recommended Joint Width:
2mm
Ceramic Floor Tiles
Minimum Recommended Joint Width:
5mm
TAL Industrial Epoxy Grout
Walls - Fine, Floors - Coarse
Porcelain Tiles
Granite Tiles
Marble Tiles
Minimum Recommended Joint Width:
3mm
Natural Stone Tiles
ie Slate, Sandstone, etc.
Minimum Recommended Joint Width:
5mm or as per manufacturer
TAL Industrial Epoxy Grout
Walls - Fine, Floors - Coarse
Clay / Terracotta Tiles
Minimum Recommended Joint Width:
5mm
TAL Industrial Epoxy Grout
Walls - Fine, Floors - Coarse
Extruded Tiles
(VItro, NCI, Interbau, etc.)
Minimum Recommended Joint Width:
5mm
TAL Industrial Epoxy Grout
Walls - Fine, Floors - Coarse
Concrete Tiles
Minimum Recommended Joint Width:
5mm or as per manufacturer
TAL Industrial Epoxy Grout
Walls - Fine, Floors - Coarse
Terrezzo Tiles
Minimum Recommended Joint Width:
3mm
Glass Tiles
Minimum Recommended Joint Width:
5mm
Mosaic Tiles
The bonding and grouting of mosaics should be done in ONE operation , i.e. the adhesive will form the grout as well
NOTE :
• TAL Super White Wall Grout is suitable for wall joints up to maximum 3mm wide
• TAL Wall & Floor Grout is suitable for wall and floor joints 2 – 8mm wide
• TAL Quarrygrout is suitable for wall and floor joints 5 – 25mm wide
• TAL Stainfree Grout is suitable for wall and floor joints 3 – 12mm wide
• TAL Fine Epoxy Grout is suitable for wall and floor joints 3 – 20mm wide
• TAL Industrial Grout is suitable for floor joints only, minimum 8mm wide
It is important to use the stipulated amount of liquid in the TAL Grout mixture. When cleaning, a damp, not wet, sponge must be used.
Over hydration (too much water) of the mix, or in cleaning, causes colour variations in the grout joints, and also affects the integrity of the grout, resulting in a friable (soft, powdery) product.