<< Back to TAL Grout Catalogue
TILE TYPE |
TAL RECOMMENDED GROUT |
Exterior / Exposed areas,
Suspended Floors,
Heavy Traffic Areas
and hospitals), Pools, Saunas, Steamrooms, etc
Minimum Recommended
Joint Width:
2mm
Minimum Recommended
Joint Width:
5mm
Walls - Fine, Floors - Coarse
Granite Tiles
Marble Tiles
Minimum Recommended
Joint Width:
3mm
ie Slate, Sandstone, etc
Minimum Recommended
Joint Width:
5mm or as per manufacturer
Walls - Fine, Floors - Coarse
Minimum Recommended
Joint Width:
5mm
Walls - Fine, Floors - Coarse
(Vitro, NCI, Interbau, etc)
Minimum Recommended
Joint Width:
5mm or as per manufacturer
Walls - Fine, Floors - Coarse
Minimum Recommended
Joint Width:
5mm or as per manufacturer
Walls - Fine, Floors - Coarse
Minimum Recommended
Joint Width:
3mm
Minimum Recommended
Joint Width:
5mm
| The bonding and grouting of mosaics should be done in ONE operation , i.e. the adhesive will form the grout as well |
<< Back to TAL Grout Catalogue
NOTE :
• TAL Super White Wall Grout is suitable for wall joints up to maximum 3mm wide
• TAL Wall & Floor Grout is suitable for wall and floor joints 2 – 8mm wide
• TAL Quarrygrout is suitable for wall and floor joints 5 – 25mm wide
• TAL Stainfree Grout is suitable for wall and floor joints 3 – 12mm wide
• TAL Fine Epoxy Grout is suitable for wall and floor joints 3 – 20mm wide
• TAL Industrial Grout is suitable for floor joints only, minimum 8mm wide
It is important to use the stipulated amount of liquid in the TAL Grout mixture. When cleaning, a damp, not wet, sponge must be used.
Over hydration (too much water) of the mix, or in cleaning, causes colour variations in the grout joints, and also affects the integrity of the grout, resulting in a friable (soft, powdery) product.
